Nail Stamper : Big Pad as a scraper, thin and comfortable for holding and scrape the exceed polish from plates nail stamper kit contains 1pcs nail stampers and 1pcs scrapers. The stamper is easy to use and picks up patterns quickly. Silicone nail stamper is so clear that you can easily see where you're pressing on nails and not distort the image, easily creating stylish and funny nail art. The perfect manicure tool for nail professionals and beginners. How to clean: We do not recommend using acetone/nail polish remover to clean the surface of this stamper between uses. Instead, you can use tape or a lint roller to clean and protect the heads. Tips : The punching head is detachable, please do not squeeze or squeeze too much, just press gently when using. When transferring the image to the stamper, use light rolling pressure gently. If the pressure is too high, the stamper will not be able to pick up the image from the plate. Do not rub the clean head. Sanding can cause haze. How to use: Step 1 : Apply stamping polish to the design on the nail plate of your choice. Step 2 : Hold the scraper card at a 45-degree angle and gently scrape across the plate to remove excess polish. Try to scrape only once, don't push the card too hard onto the board and work as quickly as possible to avoid drying. Step 3 : Hurry up! Using the soft part of the stamp, pick up the image using the up and down technique. Step 4 : Place the stamper on the nail so that the design is properly aligned. Make sure to work fast, as the polish on the stamper will dry in two seconds.